ELEXA CONSUMER PRODUCTS LEVEL MOUNT INSTALL
ELEXA CONSUMER PRODUCTS LEVEL MOUNT FULL
ELEXA CONSUMER PRODUCTS LEVEL MOUNT PROFESSIONAL
ELEXA CONSUMER PRODUCTS LEVEL MOUNT TV

Level Mount is not responsible for any damage or injury caused by incorrect mounting, assembly, installation or use. Level Mount makes no representation or warranty, express or implied, regarding the accuracy, completeness or sufficiency of the information contained in this document.

However, Level Mount makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation, assembly or use of this product. Level Mount has made every effort to make these Installation Instructions accurate and complete.

ELEXA CONSUMER PRODUCTS LEVEL MOUNT TV

It is also the installerвЂ™s responsibility to ensure that the TV is properly and securely attached to the TV Wall Mount using only the enclosed fasteners and components and to verify that the screws and power cords do not touch wires, pipes, or metal parts within the wall (since this could cause damage to these items or cause electrical shock).ДЎ0. It is the installerвЂ™s responsibility to select the appropriate installation location and the supporting surface on which to mount this TV Wall Mount and to ensure that the TV Wall Mount is anchored properly to the wall.

ELEXA CONSUMER PRODUCTS LEVEL MOUNT INSTALL

Never use damaged parts or try to install the TV Wall Mount if you do not have all needed parts.Д©.

Before installing, check to make sure all parts of the TV Wall Mount indicated in these Installation Instructions are included and undamaged. Use at least two people when lifting and positioning the TV on the TV Wall Mount.ДЁ. Do not lift more weight than you can handle. Using screws of improper size can damage the TV.Д§. If any of the screws provided are not suitable for the TV Wall Mount system, the installer must not under any circumstances drill holes into the TV or into the TV Wall Mount components. Screws should easily and completely thread into the TV mounting holes. Over-tightening the screws or bolts could damage the TV Wall Mount, greatly reducing its holding power. Once the screw is flush against the TV and the screwdriver is more difficult to turn and will not turn further, stop otherwise there is a risk of over-tightening the bolt. Tighten screws and bolts firmly but do not over-tighten them.

ELEXA CONSUMER PRODUCTS LEVEL MOUNT FULL

Make sure all screws and bolts are tightened before allowing the TV Wall Mount to bear the full weight of the TV.

Do not use the TV Wall Mount for devices other than as specified in these instructions.ДҐ. See Stud Finder Instructions, included below. If mounting to wood studs, make sure that mounting screws are anchored into the center of the studs. Do not install the TV Wall Mount only to drywall or plasterboard. The TV Wall Mount must be attached to wood studs or to properly installed anchors in concrete. This TV Wall Mount contains small items that could be a hazard if swallowed.

ELEXA CONSUMER PRODUCTS LEVEL MOUNT PROFESSIONAL

If you are at all unsure about any step in these instructions or your ability to install the TV Wall Mount safely and securely, you should seek professional help from a qualified contractor.ДЈ. If you have questions that do not appear to be covered in these Installation Instructions, please refer to the вЂњHelpful HintsвЂќ section of the detail page for the TV Wall Mount or contact us as described under the вЂњNeed HelpвЂќ section. It is the installerвЂ™s responsibility to make sure all components are properly assembled and installed using the instructions provided.Дў. Failure to read, thoroughly understand and follow the instructions can result in serious personal injury and damage to equipment and property. Do not begin the installation of the TV Wall Mount until you have read and understood the instructions and warnings contained in these Installation Instructions. Using this product with a TV heavier than the maximum weight, or that exceeds these dimensions, may result in serious personal injury and damage to equipment and property.ДЎ. These TV Wall Mounts were designed specifically to hold TVs with a maximum weight of up to 200 lbs (90kg) and with the following dimensions: 37вЂќ - 85вЂќ (939,8 mm - 2159 mm) HE800T, HE885T and 26вЂќ - 85вЂќ (660,4 mm - 2159 mm) NTPFW, LMPFW85, DC65ADLP, LM65ADLP, ELPFW-07, HETWF. If you believe the product is defective, has a missing or broken part or are having difп¬Ѓculty with assembly, please contact Level Mount directly 24 hours a day, 7 days a week, 365 days a year as listed above, for a quick and efп¬Ѓcient solution to your problem.

E-mail Level Mount at NOT RETURN THIS PRODUCT TO THE STORE OR WEB SITE FROM WHICH IT WAS PURCHASED.

Contact Level Mount Customer Service as follows: If you have questions, our trained Customer Service Department is happy to assist you 24 hours a day, 7 days a week, every day of the year. If you have installation questions about your TV Wall Mount, please go to to view product tutorials.

Elexa consumer products level mount